4-SIDED FILM APPLICATOR, DUAL RESERVOIR, 100|200|300|400ΜM – VF2179
Special 4-gap (quadruplex) Stainless Steel applicator with double reservoir each with 4 different values. This TQC applicator allows the user two apply 2 layers of coating simultaneously with the same thickness. Ideally for use in combination with the TQC Automatic Film Applicators and TQC Abrasion- & Scrub testers.
4-SIDED FILM APPLICATORS
The TQC 4-Sided Film Applicator (Quadruplex) has four application sides to apply paint films with four different predefined thicknesses, in film width 60 or 80 mm. One side of the applicator is equipped with a removable lateral guidance support for straight application. The high grade stainless steel will not be affected by acid or base elements.
BAKER FILM APPLICATORS
Cylindrical film applicator with 4 application sides for applicating paint-films of 4 different pre-defined thicknesses. The Baker applicator’s are available in film width 60 mm and 80 mm and are suitable for applying a host of different products onto flat and relatively solid substrates. Since it’s made out of high-grade stainless steel, the Baker Film Applicator will not be affected by acid or base elements.
BIRD-TYPE FILM APPLICATORS, 4-SIDED
TQC Bird-type film applicator with flat edges. Four application sides for applying 4 different pre-defined thicknesses. The TQC Bird-type applicator is available in film width 50, 75 and 100mm and suitable for applying a host of different products onto flat and relatively solid substrates. The high-grade stainless steel will not be affected by acid or base elements.
We can give no guarantee of the wet thickness that will be obtained. The wet thickness is dependent upon the solids and vehicle content of the wet material as well as other factors. Film thickness deposited may vary from 40% to 80% of the actual gate clearance of the TQC Bird-type applicator.
Material:
DAIDO 440C medical grade Martensitic stainless tool steel.
Sub Zero Vacuum hardened (+1756°C to -70°C), hardness HRC 55 (through hardened*) & tempered.
Surface treatment:
polished
Overall accuracy:
± 2 µm
*Through hardening versus Case-hardening or surface hardening.
Through-hardening means the metal uniformly is hardened throughout the piece. Case- or surface (face / frame) hardening only hardens the top layer of the metal. Once the top layer is degraded excessive wear and tear will occur on the product limiting its life time and affecting accuracy.
BIRD-TYPE FILM APPLICATORS, SINGLE GAP
TQC Bird-type film applicator with one flat edge. One application side for applying 1 pre-defined thickness. The TQC Bird-type applicator single gap is available in film width 50 and 75 mm and suitable for applying a host of different products onto flat and relatively solid substrates. The high-grade stainless steel will not be affected by acid or base elements.
Some models are equipped with removable guidance plates for straight application.
We can not give guarantee of the wet thickness that will be obtained. The wet thickness is dependent upon the solids and vehicle content of the wet material as well as other factors. Film thickness deposited may vary from 40% to 80% of the actual gate clearance of the TQC Bird-type film applicator.
Material:
DAIDO 440C medical grade Martensitic stainless tool steel.
Sub Zero Vacuum hardened (+1756°C to -70°C), hardness HRC 55 (through hardened*) & tempered.
Surface treatment:
polished
Overall accuracy:
± 2 µm
*Through hardening versus Case-hardening or surface hardening.
Through-hardening means the metal uniformly is hardened throughout the piece. Case- or surface (face / frame) hardening only hardens the top layer of the metal. Once the top layer is degraded excessive wear and tear will occur on the product limiting its life time and affecting accuracy.
SPIRAL BAR COATER
TQC Wire bar applicator with a film width of 310 mm and available in ranges from 4 to 200 µm
The Wire bar or spiral bar / drawdown rod applicator is ideal for applying a film on thin materials such as sheets or plastic. Also works on flexible substrates, and with motorized film applicators*. The high-grade stainless steel will not be affected by acid or base elements.
Totale length: 440 mm
Length application area: 320 mm
Straightness: <50µm
* TQC Wire bar coaters with starting art. code AB…. fit TQC Automatic Film Applicator Models sold from 2012 and on. If you have an older model TQC Automatic Film Applicator, another type of wire bar applicator has to be used. Information about this type of wire bar coater can be obtained under the Xtra Info section below.
UNIVERSAL TEST PANEL RACK – VF8550
Universal test panel rack that holds up to 18 test panels. Minimum width of test panels is 70 mm / 2.76 inch, with a thickness of 0,5 to 5 mm / 0.02 inch to 0.2 inch.
Suitable for metal panels, glass, wood, plastic etc. The panel rack can be placed horizontally or vertically on a desk, but can also be wall-mounted.
Features
- Holds up to 18 test panels at once
- To be used horizontally or vertically on desk or mounted on wall
- Specially shaped slots for optimum grip
- Suitable for metal panels, glass, wood, plastics etc.
